Call For Paper Volume:4 Issue:10 Oct'2017 |

Design and Development of Push Pull DC-DC Converter by ZCS/ZVS to Electrical Vehicle (EVs) Applications

Publication Date : 10/07/2015



Author(s) :

Veeresh H , Dr. Ashok Kusagur.


Conference Name :
4th International Conference on Recent Trends in Engineering & Technology(ICRTET-2015) July 2-4,2015 Organized by SNJB's KBJ College of Engineering,Chandwad,Nashik,Maharashtra,India



Abstract :

Electrical Vehicle (EVs) is taking a leading role in upcoming research area of Renewable energy source applications. In this paper, a novel Push–Pull converter is proposed, which has simple and reduced gating signal used by the (in this proposed) converter due to two primary devices (switches S1 and S2) with common ground to supply. Fixed frequency duty cycle modulation (100k Hz) with source voltage (12V) is used to design proposed converter to regulate the out-put. This topology yields high efficiency through low circulating currents, zero current switching (ZCS) and low-current switching of the primary side devices, ZVS of the secondary side switches, and in the majority of switching cycle direct power transfer to the load. An active-clamped circuit is also used to reduce the voltage spike on the power switches for raising the system reliability. The designed converter has been simulated using Simulink Model (Matlab-Software) tools. Simulation results for input voltage Vin = 12 V, output voltage Vo = 300 V, output power Po = 250W, device switching frequency fs = 100 kHz are verified through the output waveforms which shows better performance of the system.


No. of Downloads :

12


Indexing

Web Design MymensinghPremium WordPress ThemesWeb Development

Conference organizers are invited to submit conference proposals. Contact: info.ijmter@gmail.com

July 3, 2017

International Conference on Recent Trends in Engineering and Technology published by IJMTER

May 10, 2016
Prof. Rahulkumar M. Sonar Program Director, ICRTET'2015 Conference Venue: SNJB's Late Sau. K. B. Jain College of Engineering Chandwad

National Conference on “Advances in Engineering and Technology for Sustainable Development” @ Government Polytechnic, Nagpur (MS) , Published By IJMTER

February 24, 2015
Currently Being Held @ Government Polytechnic, Nagpur (MS), INDIA Date: 27th February,2015 Published & Proceeding By: IJMTER Published in Volume-2 , Issue- 2 February-2015

We welcome innovative Research from Researcher.

September 30, 2014

Welcome to International Journal of Modern Trends in Engineering and Research

July 21, 2014