Call For Paper Volume:5 Issue:7 Jul'2018 |

Refrigeration And Air Conditioning System Using Sensor

Publication Date : 31/01/2017


DOI : 10.21884/IJMTER.2017.4027.YIUPL

Author(s) :

Sandeep D.Shelar , Bhoi Ashwini Y. , Jadhav Nilam G. , Mule Tejashree D.


Volume/Issue :
Volume 4
,
Issue 1
(01 - 2017)



Abstract :

This paper presents the validation of a design model for vapour compression absorption refrigeration systems developed by Akintunde (2004a). The objective of this project was to substantiate and provide support for RAC Standard 1250/1251, ‘Standard for Performance Rating of Walk-In Coolers and Heaters, air conditioning system.’ In evaporator refrigerant liquid is converted to gas absorbing heat from the air in compartment and get cold water. Compressor is to circulate the refrigerant in the system under pressure this concentrates the heat it contains the low pressure gas change to high pressure. Air passing the condenser coil carries heat to receive the high pressure gas from compressor and convert the gas into liquid i.e. hot water. Expansion valve is removes the force from liquid to a vapour in the evaporator. An air conditioning system using for a dehumidifying cooling device has developed that comprising a heating source for producing hot water, a heat exchanger for transferring heat from the hot water to circulating water, a circulation pump for circulating the resulting hot water heated in the heat exchanger, a heating pipeline coupled to the circulation pump for conveying the hot water to a heat supply. A user heat exchanger connected to the heating pipeline for carrying hot water to the heat supply target area, a dehumidifying cooling device connected to a hot water pipe of users heat exchanger and installed in each household within the heat supply target area, the dehumidifying cooling device removing moisture from the air by using hot water supplied from the hot water pipe to deal with covert heat load and to lower the temperature of the dehumidified air via evaporation of water controlled in the air. All four things contain in our RAC system. In this project we can implements that measuring the coldness and hotness of water we can get specific temperature with the help of sensor. In this RAC system we give us hot water, cold water, hot air and cold air. These products combine with one so it is very effective.


No. of Downloads :

3


Indexing

Web Design MymensinghPremium WordPress ThemesWeb Development

Refrigeration And Air Conditioning System Using Sensor

January 17, 2017