Call For Paper Volume:4 Issue:10 Oct'2017 |

Design modification and Failure Analysis of Damper Spring of 310 D.P.A of Single Plate Clutch System

Publication Date : 17/05/2015



Author(s) :

KAUSHIK C LATHIYA , N.P.Badola , C.L.Undhad , H.D.Rathod.


Volume/Issue :
Volume 2
,
Issue 5
(05 - 2015)



Abstract :

Clutch is device which is used to transmit power one component to another. It is a device used to connect the driving shaft to a driven shaft, so that the driven shaft may be started or stopped at will, without stopping the driving shaft. A clutch thus provides an interruptible connection between two rotating shafts Clutches allow a high inertia load to be stated with a small power. The engine power transmitted to the system through the clutch. The failure of such a critical component during service can stall the whole application. The objective of present project is to do analysis on driven plate assembly (D.P.A) of a clutch which is often fails during the operation. In this present research work analysis is conducted on driven plate of a clutch used in TATA Vehicle. There are so many complaints are noted against the failure of clutch during heavy loads. The damper spring of driven plate assembly failed normally during its operation due to cyclic loading. For this reason we designed the damper spring and modeled in Pro-E and analyzed using FEA package in the process of designing and analyzing the actual design is changed to lower down the failure values. And the design may suggest to the company


No. of Downloads :

20


Indexing

Web Design MymensinghPremium WordPress ThemesWeb Development

Design modification and Failure Analysis of Damper Spring of 310 D.P.A of Single Plate Clutch System

May 14, 2015