Call For Paper Volume:4 Issue:10 Oct'2017 |

Designing and performance of DSTATCOM with the help of ICCT to improve power quality with feeding of variety of loads (L-NL & Induction Motor loads)

Publication Date : 28/02/2015



Author(s) :

Virendra Jain , C. Veeresh , Virendra S. Solanki.


Volume/Issue :
Volume 2
,
Issue 2
(02 - 2015)



Abstract :

This work presents a method capable of designing DSTATCOM to reduce harmonic distortion and correct the power factor to improve power quality. The use of alternating current circuits in electrical power system has been a common practice nearly since the very inception of the interconnected power network. The most familiar loads on such a system were the constant power, constant impedance and constant current loads or a linear combination of thereof. In these cases, the voltage and current wave shapes are nearly pure sinusoidal. But this is no longer the case with modern electric power system. Massive use of the nonlinear and time varying devices has led to distortion of voltage and current waveforms. As a consequence, recently the issue of power quality has become important. Both electric utility and end users of electric power are becoming increasingly concerned about the quality of electric power. The term “power quality” has been used to describe the variation of the voltage, current and frequency on the power system beyond a limit. The performance of the system is simulated for Linear and Motor load. Key words: Programmable Source, DSATACOM, Capacitive filter, Power Quality, PI & Hysteresis controller, Motor load.


No. of Downloads :

31


Indexing

Web Design MymensinghPremium WordPress ThemesWeb Development

Designing and performance of DSTATCOM with the help of ICCT to improve power quality with feeding of variety of loads (L-NL & Induction Motor loads)

February 10, 2015