Call For Paper Volume:4 Issue:8 Aug'2017 |

Investigation of Springback design process parameters and effect of unloading Elastic Modulus in V bending of Aluminium HE9

Publication Date : 10/07/2015



Author(s) :

Gayatri J. Abhyankar , Milind S. Yadav , Milind S. Kirkire.


Conference Name :
4th International Conference on Recent Trends in Engineering & Technology(ICRTET-2015) July 2-4,2015 Organized by SNJB's KBJ College of Engineering,Chandwad,Nashik,Maharashtra,India



Abstract :

This paper focuses on investigation of design process parameters which mainly affect the Springback. Elastic Modulus is considered as the factor related to material and bending angle, punch radius and material thickness are considered as the factors related to the V bending process. The results of experiments for varying elastic modulus at different plastic strains were regressed and the regression equation gave the relationship between elastic modulus and plastic strain which can be used for more accurate prediction of Springback. The further experiments were conducted for V bending to find the effect of critical process parameters on Springback for aluminium (HE 9). The percentage contribution of each parameter causing springback was calculated. The material thickness was found as the most significant parameter causing springback in aluminium (HE9). Hence in order to minimize the Springback in aluminium (HE9), material thickness needs to be effectively controlled. The confirmation experiments were conducted for validation. The results of the confirmation experiments were found to be within the confidence interval.


No. of Downloads :

10


Indexing

Web Design MymensinghPremium WordPress ThemesWeb Development

Conference organizers are invited to submit conference proposals. Contact: info.ijmter@gmail.com

July 3, 2017

International Conference on Recent Trends in Engineering and Technology published by IJMTER

May 10, 2016
Prof. Rahulkumar M. Sonar Program Director, ICRTET'2015 Conference Venue: SNJB's Late Sau. K. B. Jain College of Engineering Chandwad

National Conference on “Advances in Engineering and Technology for Sustainable Development” @ Government Polytechnic, Nagpur (MS) , Published By IJMTER

February 24, 2015
Currently Being Held @ Government Polytechnic, Nagpur (MS), INDIA Date: 27th February,2015 Published & Proceeding By: IJMTER Published in Volume-2 , Issue- 2 February-2015

We welcome innovative Research from Researcher.

September 30, 2014

Welcome to International Journal of Modern Trends in Engineering and Research

July 21, 2014