Call For Paper Volume:4 Issue:8 Aug'2017 |

Optimization of the material removal rate of EN10250-2 using taguchi method

Publication Date : 11/03/2016



Author(s) :

MANISH MAVI , Siddharth Chauhan , SURAJ BHAN.


Volume/Issue :
Volume 3
,
Issue 2
(03 - 2016)



Abstract :

Purpose: The purpose of this research paper is focused on the analysis of optimum cutting conditions to get maximum material removal rate (MRR) and lowest cutting forces in turning C40 alloy steel by Taguchi method. Design/Methodology: Experiment was designed using Taguchi method and 9 experiments were designed by this process and experiments conducted. S/N ratio for both cutting forces and MRR calculated with the help of Minitab 17 software. Findings: Taguchi method has shown that the feed has significant role to play in producing maximum MRR and lowest cutting forces. The depth of cut has lesser role on MRR from the tests and cutting speed has lesser role on cutting forces. Originality/value: The results obtained by this method will be useful to other researchers for similar type of study.


No. of Downloads :

2


Indexing

Web Design MymensinghPremium WordPress ThemesWeb Development

Optimization of the material removal rate of EN10250-2 using taguchi method

March 4, 2016