Call For Paper Volume:4 Issue:8 Aug'2017 |

Geotechnical Aspects In Modelling Framed Type Foundation For 210 MW Turbo Generator Using Computer Software

Publication Date : 28/02/2015



Author(s) :

Vivek B. Dhait , Dr. D. K. Parbat , Bhushan R. Ambade.


Volume/Issue :
Volume 2
,
Issue 2
(02 - 2015)



Abstract :

Turbo Generator consists of turbine and generator. It is used for generating Electricity. It is a very heavy machine, inducing large forces due to its self weight & operation on foundation.The Turbo Generator foundation is a vital & expensive part in a power plant complex. It is therefore essential that the foundation is designed adequately for all possible combinations of static and dynamic loads. It is a task of the structural designer to check the adequacy of the foundation under static and dynamic condition. At times it may becomes necessary to suitaibly alter the dimensions of the foundation as suggested by machine manufacturer so as to satisfy the design requirements.Any alterations thus found necessary must however have the prior concurrence of the Mechanical Engineer to ensure that these changes do not affect the erection operation of the machine.It is desirable therefore to have a close coordination between the foundation designer and the erection staff from the early planning stage until the foundation is completed and the machine is installed.


No. of Downloads :

10


Indexing

Web Design MymensinghPremium WordPress ThemesWeb Development

Geotechnical Aspects In Modelling Framed Type Foundation For 210 MW Turbo Generator Using Computer Software

February 24, 2015